FAQs

How to store eco-right boards?
If possible, store eco-right boards on a fully-supported and level plane to avoid warping.

How to cut eco-right boards into desired shape and size?
Saws with fine teeth are preferred for cutting. Circular saws on a rail and table saws are effective in cutting clean straight lines through the material. Milling machines and wood cutting routers , CNC routers can be successively used on boards. Sharp tools and relatively slow feed rate give the best results.

What are the common fastenings that can be used on eco-right boards?
Physical fastenings like screws, clips, rivets and bolts can be used. They can be easily nailed.

Can the eco-right boards be welded?
The boards can be edge welded using plastics heat welding methods.

What adhesives can be used to bond eco-right boards with other material?
Any rubber based glue can be used to directly stick other material on Eco-right Boards.

Can eco-right boards be painted?
Yes, eco-right boards can be painted after a thorough coat of surface by PU based primer.

What is the life span of eco-right boards?
Eco right boards are an ageless product which is water proof, termite proof, resistant to weather actions. It has a long life.

Can eco-right boards be worked with regular wood – working tools?
Regular wood working tools can be used to work with eco-right boards. To get good cutting edges panel saw with counter blade arrangement is recommended.

Can we give surface finishing to eco-right boards?
Yes, the edges of eco-right boards can be finished by sanding, flame finishing and polishing using a buffing wheel with plastic polishing compound.

Do eco right boards require maintenance?
Eco right boards require little or no maintenance. Surface dirt can be easily removed using a mild detergent on a cloth.

Can eco-right boards be printed?
Eco right boards can be printed using vinyl based inks.